Replacement Doors for Walk-In Coolers & Freezers
Built to fit your existing opening, including walk-ins we didn’t build.
Southeast Cooler has manufactured cold storage doors in Lithia Springs, Georgia, since 1979. We build replacement doors for walk-in coolers and freezers built by Southeast Cooler and by other manufacturers, made to your existing opening so you don’t have to modify the wall panels or replace the walk-in.
Send us your measurements. We’ll build the door.

Get a quote on a replacement door.
Tell us whether it’s a cooler or a freezer, who built the walk-in, and your opening dimensions. Photos help.
REPLACEMENT DOOR QUOTE

Manufacturing Replacement Doors Since 1979

Fits Other Manufacturers’ Walk-Ins

ETL Safety Approval Listed

Built to Your Measurements

“It was a pleasure doing business with Kirk @ Southeast Coolers!
Excellent customer service! We sent in our measurements and they custom-built a cooler door for us. Everything fit perfectly! Will definitely use them again!”
– Anne Newton, Google Review ⭐⭐⭐⭐⭐
Don’t Let a Failing Door Shut Down Your Operation
A walk-in door that won’t seal is not a deferred maintenance item.
Once the gasket stops sealing, warm air moves through the opening continuously. The refrigeration system runs to keep up, ice builds at the door line, product at the front of the box warms, and your energy cost climbs every day the door stays in service. In a freezer, it happens faster.
Then there’s the inspection. A door that won’t close, won’t seal, or has a damaged or torn gasket is a finding, and in a food service operation, a finding at the walk-in door is not a small one.
Southeast Cooler replacement doors are fast and easy to install, with positive sealing gaskets and heavy-duty hardware.
Start Here: Who Built Your Walk-In?
Not sure which you have? Most people aren’t, and that’s fine. Send us photos of the door and the surrounding jamb along with your measurements, and we’ll tell you which configuration fits.

If Southeast Cooler built your walk-in:
You likely need a door leaf only. Your existing frame stays in place, and we build a replacement door to fit it — the fastest and lowest-cost route back to a sealing door.

If another manufacturer built your walk-in:
You will most likely need a flat frame door. This is our most common replacement configuration for walk-ins we didn’t build. It consists of the door plus metal-clad wood that attaches to your existing door jamb.

Less common configurations:
Depending on the condition and construction of your opening, an infitting door or an overlap door may be the better fit. These are less common door types, but we build both.
Compare Replacement Door Types
Let’s compare the different types of replacement doors:
| Type | Best for | What you get | How common |
|---|---|---|---|
| Door Leaf Only | Walk-ins built by Southeast Cooler | The door only — your existing frame stays | Common for SE Cooler walk-ins |
| Flat Frame | Walk-ins built by other manufacturers | Door plus metal-clad wood attaching to your existing jamb | Most common |
| Infitting | Openings suited to an in-fitting installation | Door fitted into the existing opening | Less common |
| Overlap | Specific opening conditions | Door overlaps the face of the opening | Rare |

How to Measure Your Opening
Getting this right is the whole job. Before you call or submit the form, have:
- Opening width and height: Measure the clear opening, not the old door
- Panel thickness: Typically 4″ or 6″
- Walk-in manufacturer: If you know it, or if there’s a data plate inside
- Hinge side: Standing outside the door, looking in
- Photos: The door face, the jamb, and the surrounding panel
If you’re not certain about any of it, send photos anyway. We’ve been specifying replacement doors from customer measurements for decades.
What’s Included with Every Replacement Door
- Pre-hung and ready to install with heavy-duty cam lift hinges
- Positive sealing gaskets: magnetic door gaskets and double sweep bottom door gaskets
- Heavy-duty hardware: hydraulic self-closing door assists and heavy-duty locking door latches with interior safety door releases
- Aluminum diamond tread kick plates
- 4″ or 6″ polystyrene insulation (urethane insulation is available upon request)
- ETL Safety Approval Listed
Available options
- Temperature indicator
- Light switch
- Vapor-proof light fixture
Finishes
- Stainless steel type 304
- Stucco aluminum embossed
- Stucco white embossed
Finishes (Continued)
- Stucco galvanized embossed
- Smooth galvanized flat finish
Mounting Configurations
Replacement doors are available in flush mounted, flat frame mounted, overlap mounted, and recessed configurations, so the door can be matched to how your existing opening is built.

Need More Than A Door?
Sometimes the door is fine, and the hardware isn’t. A worn gasket, a failed closer, or a sagging hinge can often be replaced on its own for a fraction of the cost of a new door.
5-Star Customer Reviews
We provide commercial walk-in cooler and freezer and replacement door solutions to customers nationwide and internationally.
Replacement Door FAQs
Yes. That’s one of the most common things we do. For walk-ins built by another manufacturer, a flat frame door is usually the answer — it’s the door plus metal-clad wood that attaches to your existing door jamb, so the opening doesn’t have to be modified.
If Southeast Cooler built your walk-in, yes — we can supply the door leaf only. For other manufacturers’ walk-ins, a flat frame door is typically the better fit.
Send us measurements and photos of the opening and jamb, and we’ll tell you. You don’t need to know the terminology.
Opening width and height, panel thickness, hinge side, and whether it’s a cooler or a freezer. Photos of the door and surrounding jamb help us confirm the configuration.
Not necessarily. A worn gasket or sweep, or a failed closer, can often be replaced on its own. See Door Hardware & Gaskets.
Get Your Replacement Door Quote
Send us your opening dimensions, whether it’s a cooler or a freezer, and who built the walk-in. If you’d rather talk it through, call us today and we’ll be happy to help you.


