Bi-Parting Sliding Doors

Southeast Cooler/Freezer

Tell us whether it’s a cooler or a freezer, your opening dimensions, and whether you want manual or automatic opening.

Replacement Door Quote

Section

What Customers Are Saying

background

Single & Double Configurations

Sliding Door

Single Bi-Parting

Sliding Door

Double Bi-Parting

Manual or Automatic Opening

Bi-parting doors are available with either method of operation.

If you’re weighing the two, confirm early whether power already reaches the opening or whether an electrician would need to run it, since that affects both cost and scheduling.

Cooler & Freezer Applications

These doors are built with 4″ or 6″ polystyrene insulation (urethane insulation is available upon request).

These doors are built with 4″ or 6″ polystyrene insulation (urethane insulation is available upon request) and add a heated threshold and frame, which keep the seal pliable so the door continues to open and seal reliably at low temperatures.

Available on interior and exterior surfaces:

  • Stainless steel type 304
  • Stucco aluminum embossed
  • Stucco white embossed
  • Stucco galvanized embossed
  • Smooth galvanized flat finish

New Walk-In or Replacement

Walk-In Freezer

What We Need From You

  • Opening width and height
  • Wall panel thickness: Typically 4″ or 6″
  • Cooler or freezer
  • Manual or automatic opening
  • Whether 115/1/60 power is available at the opening
  • Single or double configuration, if you know which you need
  • Whether this is a new walk-in or a replacement
  • Photos: The opening, the wall above it, and the wall on both sides of it

Bi-Parting Door FAQs

If you have further questions about our bi-parting door products, please don’t hesitate to give us a call at 770-941-6703.

A bi-parting door divides into two halves that travel apart along the track, rather than sliding as one leaf across the wall to one side of the opening. Southeast Cooler builds them in single and double configurations for walk-in coolers and freezers, with either manual or automatic opening. Which arrangement works for you depends largely on the wall space available on either side of the opening, since each half needs somewhere to travel.

 

Single bi-parting serves one opening with a pair of door halves that part along the track. Double bi-parting is a double door arrangement, which we also build as automatic access dual sliding doors. If you’re not sure which your opening calls for, send us the measurements along with photos of the opening and the walls to either side, and we’ll confirm the right configuration before anything is quoted.

 

Only if you want automatic opening. Automatic bi-parting doors use heavy-duty door tracks and a drive assembly, and require a 115/1/60 electrical supply — standard single-phase 115-volt, 60-hertz power. Manual bi-parting doors are moved by hand and need no electrical connection at all. It’s worth settling this early in the project, because running power to the opening affects both cost and scheduling.

 

Both travel along a track rather than swinging on hinges, and both are available with manual or automatic opening in the same insulation and finish options. The difference is how the door moves: a single horizontal sliding door travels as one leaf to one side of the opening, while a bi-parting door splits into halves that travel apart. The wall space available around the opening is usually what decides between them, so send us photos, and we’ll advise.

 

Every cold storage door we manufacture is built to the opening it’s going into rather than pulled from stock. Send us the opening width and height along with the wall panel thickness, and we’ll confirm what we can build. Photographs of the opening, the wall above it, and the walls on both sides help us check the track and clearance requirements for each half of the door.

 

Bi-parting doors are available in stainless steel type 304, stucco aluminum embossed, stucco white embossed, stucco galvanized embossed, and smooth galvanized flat finish. Interior and exterior surfaces can be specified separately, so stainless can go where it’s needed for cleanability or inspection while a different finish is used elsewhere.

 

Yes. Southeast Cooler builds replacement doors for walk-ins we manufactured and for walk-ins built by other manufacturers. Whether a bi-parting door suits your existing opening depends on the opening and the wall on either side of it, and on whether power can reach the location if you want automatic opening. Send us measurements and photos, and we’ll work through it with you.

 

Get Your Bi-Parting Door Quote


Send us your opening dimensions, whether it’s a cooler or a freezer, and whether you want manual or automatic opening. If you’d rather talk it through, call us today and we’ll be happy to help you.

OUR OTHER BRANDS

Ice Max