Electric Horizontal Sliding Doors
Powered sliding access doors with heavy-duty tracks and drive assembly.
An electric horizontal sliding door travels sideways along an overhead track under power rather than being moved by hand. Southeast Cooler builds electric sliding access service doors for walk-in coolers and freezers, either as part of a new enclosure or as a replacement on an existing opening.
Electric sliding doors use a heavy-duty door track and drive assembly, and require a 115/1/60 electrical supply at the opening.

Get a quote on an electric sliding door.
Tell us whether it’s a cooler or a freezer, your opening dimensions, and whether power is already available at the opening.
ELECTRIC SLIDING DOOR QUOTE

Manufacturing Door
Products Since 1979

Built to Your
Measurements

Cooler & Freezer
Applications

Electrical Requirement
Electric horizontal sliding doors require a 115/1/60 electrical supply to the drive assembly.
Confirm that power is available at the opening, or that it can be run there, before you specify an electric door. If power isn’t practical at that location, a manual sliding door covers the same opening without any electrical connection.
Electric or Manual?
Southeast Cooler builds horizontal sliding access doors in both versions. The door serves the same purpose either way.
The difference is how it’s opened and what it needs to operate.

Electric
An electric sliding door is powered by a heavy-duty door track and drive assembly. They require a 115/1/60 electrical supply.

Manual
A manual sliding door is moved by the user’s hand along the track. There is no drive assembly and no electrical connection at the door. See Manual Doors here.
| Electric | Manual | |
|---|---|---|
| Opening method | Powered drive assembly | Moved by hand |
| Electrical supply | 115/1/60 required | None required |
| Door track | Heavy duty door track | Overhead track |
| Configurations | Single and bi-parting | Single and bi-parting |
| Insulation and finishes | Identical | Identical |

Cooler & Freezer Applications
Cooler & Medium Temperature
These doors are built with 4″ or 6″ polystyrene insulation (urethane insulation is available upon request).
Freezer & Low Temperature
These products are built with 4″ or 6″ polystyrene insulation and add a heated threshold and frame which keep the seal pliable so the door continues to open and seal reliably at low temperatures (urethane insulation is also available upon request).
Finishes
Available on interior and exterior surfaces:
- Stainless steel type 304
- Stucco aluminum embossed
- Stucco white embossed
- Stucco galvanized embossed
- Smooth galvanized flat finish

New Walk-In or Replacement
Electric sliding doors are available on new Southeast Cooler walk-ins and as replacement doors on existing openings, including walk-ins built by other manufacturers.

What We Need From You
- Opening width and height
- Wall panel thickness: Typically 4″ or 6″
- Cooler or freezer
- Which direction the door should travel, standing outside the opening
- Whether 115/1/60 power is available at the opening
- Whether this is a new walk-in or a replacement
- Photos: The opening, the wall above it, and the wall to the side the door will travel across.
Our Google Reviews
See what our valued customers have to say about our electric horizontal sliding doors:
Electric Sliding Door FAQs
Have a question? Below are some of the most frequently asked questions we get about our sliding door products:
Electric horizontal sliding doors require a 115/1/60 supply to the drive assembly. That’s standard single-phase 115-volt, 60-hertz power. It’s worth confirming early in the project whether power already reaches the opening or whether an electrician will need to run it, because that affects both cost and scheduling. If running power isn’t practical at that location, a manual sliding door covers the same opening with no electrical connection at all.
Both travel sideways along a track rather than swinging on hinges, and both are available in single and bi-parting configurations with the same insulation and finish options. The electric version uses a heavy duty door track and drive assembly and runs on a 115/1/60 supply. The manual version is moved by hand and needs no power. Which one suits you comes down to how the opening is used and whether power is available there.
Yes. Southeast Cooler builds single and double bi-parting doors with automatic or manual opening. A bi-parting door parts in the middle, and the two halves travel in opposite directions, rather than moving as a single leaf across the wall beside the opening.
Every cold storage door we manufacture is built to the opening it’s going into rather than pulled from stock. Send us the opening width and height along with the wall panel thickness, and we’ll confirm what we can build. Photographs of the opening, the wall above it, and the wall the door will travel across help us check the track and clearance requirements.
Electric sliding doors are available in stainless steel type 304, stucco aluminum embossed, stucco white embossed, stucco galvanized embossed, and smooth galvanized flat finish. Interior and exterior surfaces can be specified separately, so stainless can go where it’s needed for cleanability or inspection, while a different finish is used elsewhere.
Yes. Southeast Cooler builds replacement doors for walk-ins we manufactured and for walk-ins built by other manufacturers. Whether a sliding door suits your existing opening depends on the opening and the wall beside it, since the door needs somewhere to travel, and on whether power can reach the location. Send us measurements and photos, and we’ll work through it with you.
Get Your Electric Sliding Door Quote
Send us your opening dimensions, whether it’s a cooler or a freezer, and whether power is available at the opening. If you’d rather talk it through, call us today and we’ll be happy to help you.


