Flush-Mounted Cold Storage Doors

The standard door on every Southeast Cooler walk-in cooler and freezer.

Every walk-in cooler and freezer Southeast Cooler builds ships with a flush-mounted door as standard. Flush-mounted means the door sits within the panel rather than on top of it, so the door face lines up with the wall face and there’s no protruding frame breaking the wall line.

Since 1979, that’s been the door on the walk-ins we manufacture in Lithia Springs, Georgia.

Southeast Cooler/Freezer

The standard flush-mounted door on every Southeast Cooler walk-in. 34″ x 78″ clear opening, pre-wired, magnetic gaskets, chrome hardware. Built since 1979.

Replacement Door Quote

Section

Replacement Doors
Fits Other Manufacturers' Walk-Ins
ETL Safety Approval
Custom Measurements
Replacement Doors
Finish Options
Quality Assembly
Custom Measurements
background

“It was a pleasure doing business with Kirk @ Southeast Coolers!
Excellent customer service! We sent in our measurements and they custom-built a cooler door for us. Everything fit perfectly! Will definitely use them again!”

– Anne Newton, Google Review ⭐⭐⭐⭐⭐

Standard Door Specifications

The standard door unit is a hinged door, flush-mounted in a 47″-wide panel, with a clear opening of 34″ wide by 78″ high.

Specification Detail
Panel width 47″
Clear opening 34″ W × 78″ H
Mounting Flush
Cooler insulation 4″ or 6″ polystyrene (urethane insulation is available upon request)
Freezer insulation 4″ or 6″ polystyrene (urethane insulation is available upon request)

What Comes on Every Flush Door

  • Pre-wired electrical. A vapor-proof light fixture and a light switch with a digital thermometer are mounted in the framed door assembly and wired at the factory.
  • Sealed on all four sides. A replaceable magnetic gasket seals the door at the top and both sides. The bottom edge is sealed with a dual neoprene sweep.
  • Self-closing hinges. Two heavy-duty polished chrome hinges with spring-loaded action for automatic closure.
  • Positive latching. A polished chrome latch with an adjustable strike plate.
  • Inside safety release. Every door includes an inside safety release handle, so it can be opened from within even when padlocked from the outside.
  • Heated threshold and frame to keep the seal pliable at low temperatures

Need a Different Door?

A flush door is the standard, not the only option. If your opening or application calls for something else:

Flat Frame Door

A flat frame door consists of the door plus metal-clad wood that attaches to your existing door jamb. It is our most common replacement door for walk-ins built by a manufacturer other than Southeast Cooler, because the new frame mounts over the opening and your wall panels stay intact.

Bi-Parting Sliding Doors

Bi-parting sliding doors are available in single and double configurations with manual or automatic opening. They suit wide openings where a single swinging leaf would be impractical, and the automatic versions require 115/1/60 electrical for the heavy-duty door tracks and drive assembly.

Already Have a Southeast Cooler Walk-In?

If your flush door is failing, you probably don’t need a new frame.

Because we built the original, we can supply a door leaf only, a replacement door built to your existing frame. It’s the fastest and lowest-cost route back to a sealing door.

You’ll need your opening measurements and a photo of the existing door and jamb.

Walk-In Cooler

Our Google Reviews

See what others have to say about our cooler and freezer door products:

Flush Door FAQs

The standard Southeast Cooler door unit is flush-mounted in a 47″ wide panel with a clear opening of 34″ wide by 78″ high. Custom sizes are available.

 

The door is built into the panel so the door face sits level with the surrounding wall panels, rather than mounting onto the face of the wall or overlapping it.

 

Yes. A flush-mounted door unit is standard on Southeast Cooler walk-in coolers and freezers, with the light fixture, switch, and thermometer pre-wired at the factory.

 

A flush door is built into the panel as part of a new walk-in. A flat frame door mounts to an existing door jamb and is our most common replacement door for walk-ins built by other manufacturers. See Flat Frame Doors.

 

Yes. Interior and exterior surfaces are available in 304 stainless and four other finishes.

 

Yes — that’s a door leaf replacement. We build the door to your existing frame. See Door Leaf Doors.

 

Yes. Hinged pallet doors are available up to 5 feet wide and 7 feet high, and custom openings are built to specification.

 

Questions About Your Door?

OUR OTHER BRANDS

Ice Max