Overlap Replacement Doors

An overlap door is one of four replacement door configurations Southeast Cooler builds for walk-in coolers and freezers. It is the rarest of the four, specified for particular opening conditions rather than as a general-purpose replacement.

If you’re not sure which configuration your opening calls for, you don’t need to work it out yourself. Send us your measurements and photos, and we’ll tell you which door fits.

Overlap Doors

Tell us whether it’s a cooler or a freezer, your opening dimensions, and who built the walk-in. Photos help!

Replacement Door Quote

Section

Since 1979
Custom Measurements
ETL Safety Approval
Cooler/Freezer Combo Products

Built to Order


Overlap doors are not a stock item. Like every cold storage door Southeast Cooler manufactures, each one is built for the opening it’s going into, using the measurements and photographs you send us.

Because this configuration is uncommon, it’s worth getting in touch early rather than trying to specify it yourself. Tell us what you’re working with, and we’ll confirm whether an overlap door is the right approach or whether one of our more common configurations suits your opening better.

What Customers Are Saying About Our Products

We provide walk-in cooler and freezer overlap door solutions to customers locally, nationwide, and internationally.

Cooler and Freezer Applications

These doors are built with 4″ or 6″ polystyrene insulation (urethane insulation is available upon request).

These products are built with 4″ or 6″ polystyrene insulation (urethane insulation is available upon request) and add a heated threshold and frame, which keep the seal pliable so the door continues to open and seal reliably at low temperatures.

Walk-In Cooler
  • Pre-hung and ready to install: With heavy-duty cam lift hinges
  • Positive sealing gaskets: Magnetic door gaskets and double sweep bottom door gaskets
  • Heavy-duty hardware: Hydraulic self-closing door assists, heavy-duty locking door latches, and interior safety door releases
  • Aluminum diamond tread kick plates
  • Insulated for the application: 4″ or 6″ polystyrene insulation, with a heated threshold and frame on freezer doors (urethane insulation is available upon request).
  • ETL Safety Approval Listed

  • Temperature indicator
  • Light switch
  • Vapor-proof light fixture
  • Stainless steel type 304
  • Stucco aluminum embossed
  • Stucco white embossed
  • Stucco galvanized embossed
  • Smooth galvanized flat finish

Available on interior and exterior surfaces.

Walk-In Freezers

What We Need From You to Build Your Overlap Door

  • Opening width and height
  • Wall panel thickness: Typically 4″ or 6″
  • Cooler or freezer
  • Hinge side: Standing outside the door, looking in
  • Who built the walk-in, if you know
  • Photos: The door face, the jamb, and the wall around the opening

Get Your Overlap Door Quote


Send us your opening dimensions, whether it’s a cooler or a freezer, and photos of the existing door and jamb. If you’d rather talk it through, call us today and we’ll be happy to help you.

Overlap Door FAQs

Have a question? Please see our overlap door FAQs below, or contact the team today at 770-941-6703.

In most cases, you won’t need to make that call yourself, and we’d rather you didn’t have to. Overlap is the least common of our four replacement configurations, so if you’re replacing a door, the odds are that a flat frame or door leaf replacement is the better fit. Send us your opening measurements along with photos of the door face, the jamb, and the surrounding wall, and we’ll confirm which configuration suits your situation before anything is quoted or built.

 

Yes. Doors are pre-hung with heavy-duty cam lift hinges and ship with the hardware already fitted, including magnetic door gaskets, double sweep bottom door gaskets, heavy-duty locking door latches, and an interior safety door release so the door can be opened from inside even when it’s padlocked from the outside. Hydraulic self-closing door assists and aluminum diamond tread kick plates are also available, and a temperature indicator, light switch, and vapor-proof light fixture can be built into the door assembly.

 

Overlap doors are available in stainless steel type 304, stucco aluminum embossed, stucco white embossed, stucco galvanized embossed, and smooth galvanized flat finish. Interior and exterior surfaces can be specified separately, so you can put stainless where it’s needed for cleanability or inspection and use a more economical finish on surfaces that don’t require it.

 

Yes. Southeast Cooler cold storage doors carry an ETL-Safety Approval listing, which confirms the door has been tested against the applicable safety standards. If your project is being inspected or you need documentation for a submittal package, mention it when you request a quote, and we’ll make sure you have what you need.

 

At minimum, the opening width and height, the wall panel thickness (typically 4″ or 6″), whether the unit is a cooler or a freezer, and the hinge side as you look at the door from outside. It also helps to know who manufactured the walk-in, if you can find out. Beyond that, photographs do most of the work.

 

Yes. Every cold storage door we manufacture is built to order rather than pulled from stock, which is why we offer four different replacement configurations instead of one. Unusual openings are common on older walk-ins, particularly where a box has been modified, repaired, or extended over the years. Send us the measurements and photos, and we’ll tell you what we can do.

 

SEE OUR OTHER BRANDS

Ice Max