Cold Storage Doors for Walk-In Coolers & Freezers
Original and replacement cold storage doors, built in Lithia Springs, Georgia, since 1979.
A failing door costs more than a failing panel. It ices up, stops sealing, drives your refrigeration load through the roof, and eventually draws a health inspector’s attention.
Southeast Cooler builds cold storage doors for walk-in coolers and freezers, both as original equipment on the walk-ins we manufacture and as replacement doors for existing openings, including walk-ins built by other manufacturers.

Get a quote on a cold storage door.
Tell us whether it’s a cooler or a freezer, who built the walk-in, and your opening dimensions.
GET A COOLER/FREEZER DOOR

Cooler & Freezer Doors Since 1979

Nearly 100 Team Members

One-Piece Panels Up to 30 ft Tall

Serving National & Global Customers

“It was a pleasure doing business with Kirk @ Southeast Coolers!
Excellent customer service! We sent in our measurements and they custom-built a cooler door for us. Everything fit perfectly! Will definitely use them again!”
– Anne Newton, Google Review ⭐⭐⭐⭐⭐
Replacing a Door on an Existing Walk-In?
Start here. Which replacement door you need depends on one thing: who built the walk-in.
| Your situation | The door you need |
|---|---|
| Walk-in built by Southeast Cooler | Door Leaf Only: We replace the door itself and reuse your existing frame. |
| Walk-in built by another manufacturer | Flat Frame Door: The most common replacement. The door plus metal-clad wood that attaches to your existing door jamb. |
| Less common applications | Infitting Door: Fits into the existing opening. |
| Rare applications | Overlap Door: Overlaps the face of the existing opening. |
Not sure which you have? Send us photos and measurements of the opening, and we’ll tell you.
Our Door Types

Replacement Doors
Southeast Cooler builds a full range of replacement doors for existing walk-ins, whether or not we manufactured the original. If you are replacing a door rather than building a new enclosure, start here, and we will help you identify which configuration fits your opening.

Flush Doors
A flush door is the original door that ships on walk-in coolers and freezers manufactured by Southeast Cooler. The door is flush-mounted in the panel, so the door face sits level with the surrounding wall panels rather than protruding into the room.

Door Leaf Doors
A door leaf replacement supplies the door only, for walk-ins manufactured by Southeast Cooler. Your existing frame stays in place, and we build the leaf to fit it, which means your wall panels are never opened up.

Flat Frame Doors
A flat frame door is our most common replacement for walk-ins built by a manufacturer other than Southeast Cooler. It consists of the door plus metal-clad wood that attaches to your existing door jamb, so the opening and the surrounding panels stay exactly as they are.

Infitting Doors
An infitting door is a less common replacement configuration, fitted within your existing opening. Send us your measurements and photographs, and we will confirm whether an infitting door suits your opening or whether another configuration is the better fit.

Overlap Doors
An overlap door is our rarest replacement configuration, in which the door overlaps the face of the opening rather than sitting within it. Like every cold storage door we manufacture, it is built to order for the opening it is going into.

Manual Horizontal Sliding Doors
A manual horizontal sliding door travels sideways along an overhead track rather than swinging on hinges, and it is moved by hand. Because there is no drive assembly, no electrical connection is required at the opening.

Electric Horizontal Sliding Doors
An electric horizontal sliding door is powered rather than moved by hand, using heavy-duty door tracks and a drive assembly. Electric operation requires a 115/1/60 electrical supply at the opening.

Bi-Parting Sliding Doors
A bi-parting door divides into two halves that travel apart along the track instead of moving as a single leaf. Southeast Cooler builds them in single and double configurations, with either manual or automatic opening.

Custom & Oversized Doors
We build custom access doors for cooler and freezer applications, including hinged pallet doors in custom sizes up to 5′ wide and 7′ high. If the opening you need falls outside our standard 34″ by 78″ clear opening, tell us the dimensions, and we will confirm what we can build.
Door Hardware & Gaskets
Southeast Cooler doors are built with replaceable magnetic gaskets, dual neoprene bottom sweeps, polished chrome hinges, positive latching latches, interior safety releases, and aluminum diamond tread kick plates. Tell us which component you need, and we will help you find the right part for your Southeast Cooler product.
What Every Southeast Cooler Door Includes
- Built for the application. 4″ or 6″ polystyrene insulation for coolers and medium temperature applications; (urethane insulation is available upon request).
- Pre-hung and ready to install. Doors are pre-hung with heavy-duty cam lift hinges.
- Sealed on all four sides. Magnetic door gaskets and double sweep bottom door gaskets.
- Heavy-duty hardware. Hydraulic self-closing door assists, heavy-duty locking door latches, and interior safety door releases on every door.
- Protected where it takes abuse. Aluminum diamond tread kick plates.
- Finish options. Stainless steel type 304, stucco aluminum embossed, stucco white embossed, stucco galvanized embossed, and smooth galvanized flat finish — available on interior and exterior surfaces.
- ETL Safety Approval Listed

Don’t Let a Failing Door Shut You Down
A walk-in door that won’t seal isn’t a maintenance item you can defer. It ice-seals the opening, forces the refrigeration system to run continuously, spoils product at the door line, and puts your operation at risk in an inspection.
Southeast Cooler replacement doors are fast and easy to install, with positive sealing gaskets and heavy-duty hardware, and can include a temperature indicator and light switch in the door assembly.

How to Measure Your Opening
Getting the measurements right is the whole job on a replacement door. Before you call, have the following info on hand:
- Opening width and height
- Wall panel thickness (typically 4″ or 6″)
- Whether it’s a cooler or a freezer
- Who manufactured the walk-in, if you know
- Hinge side, standing outside the door
- Photos of the existing door and the surrounding jamb
5-Star Customer Reviews
We provide commercial walk-in cooler and freezer and replacement door solutions to customers nationwide and internationally.
Cold Storage Door FAQs
Yes. For walk-ins built by another manufacturer, the most common option is a flat frame door, which consists of the door plus metal-clad wood that attaches to your existing door jamb.
If Southeast Cooler built your walk-in, yes — we can supply the door leaf only. For walk-ins from other manufacturers, a flat frame door is usually the better fit.
It depends on who built the walk-in and the condition of your existing opening and jamb. Send us measurements and photos, and we’ll tell you which configuration fits.
Yes. Doors are pre-hung with cam lift hinges and include gaskets, latches, and safety releases.
Yes, Southeast Cooler cold storage doors carry an ETL Safety Approval listing.
Hinged pallet doors are available up to 5 feet wide and 7 feet high, with sliding and bi-parting configurations available for wider openings.
Not always. A failing gasket, a worn sweep, or a sagging hinge can often be replaced on its own. See Door Hardware & Gaskets.
Need a Cooler Or Freezer Door?
Send us your opening dimensions, whether it’s a cooler or freezer, and who built the walk-in. If you’d rather talk it through, call us today and we’ll be happy to help you.


