Infitting Replacement Doors
Built to fit within your existing opening.
An infitting door is one of four replacement door configurations Southeast Cooler builds for walk-in coolers and freezers. It is a less common option than a flat frame door, specified where the existing opening suits a door fitted within it.
If you’re not sure which configuration your opening calls for, you don’t need to work it out yourself. Send us your measurements and photos and we’ll tell you which door fits.

Get a quote on your infitting door.
Tell us whether it’s a cooler or a freezer, your opening dimensions, and who built the walk-in. Photos help.
REPLACEMENT DOOR QUOTE

Manufacturing
Since 1979

ETL Safety
Approval Listed

Cooler &
Freezer Applications

Cooler & Freezer Applications
Cooler and medium temperature doors are built with 4″ or 6″ polystyrene insulation (urethane insulation is available upon request).
Freezer and low temperature doors are built with 4″ or 6″ polystyrene insulation (urethane insulation is available upon request) and add a heated threshold and frame, which keep the seal pliable so the door continues to open and seal reliably at low temperatures.
What’s Included
- Pre-hung and ready to install: With heavy duty cam lift hinges.
- Positive sealing gaskets: Magnetic door gaskets and double sweep bottom door gaskets.
- Heavy duty hardware: Hydraulic self-closing door assists, heavy duty locking door latches, and interior safety door releases.
- Aluminum diamond tread kick plates
- Insulated for the application: 4″ or 6″ polystyrene insulation, with a heated threshold and frame on freezer doors (urethane insulation is available upon request).
- ETL Safety Approval Listed

Options
- Temperature indicator
- Light switch
- Vapor-proof light fixture
Finishes
- Stainless steel type 304
- Stucco aluminum embossed
- Stucco white embossed
- Stucco galvanized embossed
- Smooth galvanized flat finish
What We Need From You
- Opening width and height
- Wall panel thickness: Typically 4″ or 6″
- Cooler or freezer
- Hinge side: Standing outside the door, looking in
- Who built the walk-in, if you know
- Photos: The door face, the jamb, and the wall around the opening
Not Sure Which Configuration You Need?
Southeast Cooler builds four replacement door configurations. Which one fits depends on who built your walk-in and the condition of your existing opening.
- Door Leaf Only: For walk-ins manufactured by Southeast Cooler, where the existing frame is sound. See Door Leaf Doors.
- Flat Frame: Our most common replacement for walk-ins built by other manufacturers. See Flat Frame Doors.
- Infitting: A less common configuration, fitted within the existing opening.
- Overlap: A rare configuration. See Overlap Doors.
Our Google Reviews
See what others have to say about our infitting door products:
Infitting Door FAQs
You don’t need to know the terminology to order the right door. Send us your opening measurements along with photos of the door face, the jamb, and the wall around the opening, and we’ll tell you which of our four configurations fits your situation. The right choice depends mainly on who manufactured the walk-in and the condition of your existing opening and frame.
If Southeast Cooler built the original and the frame is still sound, a door leaf is usually the most economical route. If another manufacturer built it, a flat frame door is our most common solution.
Yes. Infitting doors are pre-hung with heavy duty cam lift hinges and ship with the hardware already fitted, including magnetic door gaskets, double sweep bottom door gaskets, heavy duty locking door latches, and an interior safety door release so the door can be opened from inside. Hydraulic self-closing door assists and aluminum diamond tread kick plates are also available, and a temperature indicator, light switch, and vapor-proof light fixture can be included in the door assembly.
Infitting doors are available in stainless steel type 304, stucco aluminum embossed, stucco white embossed, stucco galvanized embossed, and smooth galvanized flat finish. Interior and exterior surfaces can be specified separately, so you can put stainless where it’s needed for cleanability or inspection and use a different finish elsewhere.
Yes. Southeast Cooler cold storage doors carry ETL Safety Approval listing, which confirms the door has been tested against the applicable safety standards. If your project is being inspected or you need documentation for a submittal package, let us know when you request a quote.
We will need the opening width and height, the wall panel thickness (typically 4″ or 6″), whether the unit is a cooler or a freezer, and the hinge side as you look at the door from outside. It also helps to know who built the walk-in if you can find out. Beyond that, photos do most of the work. Just send us the door face, the jamb, and the surrounding wall, and we can confirm the configuration from there.
That’s exactly why we ask for photos before quoting rather than after. Rather than having you identify the configuration yourself, we confirm it from the measurements and images you send, so the door you receive is the one that fits your opening. If anything about the opening is unusual or you’re not confident in a measurement, flag it when you get in touch and we’ll walk through it with you before anything is built.
Get Your Infitting Door Quote
Send us your opening dimensions, whether it’s a cooler or a freezer, and photos of the existing
door and jamb. If you’d rather talk it through, call us today and we’ll be happy to help you.


