Flat Frame Replacement Doors
We didn’t build your walk-in. We can still build your door.
A Southeast Cooler flat frame door is the standard way to put a new, properly sealing door on a walk-in cooler or freezer. It consists of the door plus metal-clad wood that attaches to your existing door jamb, so the opening stays as it is, your wall panels aren’t touched, and you don’t have to track down the original manufacturer.
It’s our most common replacement door, and it’s the reason you don’t need to know who built your walk-in to get a door that fits it.

Get a quote on a flat frame door.
Tell us your opening dimensions, whether it’s a cooler or a freezer, and send photos of the existing door and jamb.
REPLACEMENT DOOR QUOTE

Manufacturing Replacement Doors Since 1979

Fits Other Manufacturers’ Walk-Ins

ETL Safety Approval Listed

Built to Your Measurements

Manufacturing Since 1979

ETL Safety Approval Listed

Custom Built to Your
Measurements

“It was a pleasure doing business with Kirk @ Southeast Coolers!
Excellent customer service! We sent in our measurements and they custom-built a cooler door for us. Everything fit perfectly! Will definitely use them again!”
– Anne Newton, Google Review ⭐⭐⭐⭐⭐

How a Flat Frame Door Works
On a walk-in built by another manufacturer, the existing door frame is built to that manufacturer’s profile. This includes the hinge positions, the gasket seat, and the panel detail. Matching a new door to it is unreliable, and cutting it out means opening up the wall panel.
A flat frame door sidesteps both problems. It arrives as the door plus metal-clad wood that attaches to your existing door jamb. The new frame mounts over what’s already there, giving the new door a clean, square, purpose-built surface to hang from and seal against.
What that means in practice:
- No panel modification. The wall stays intact. Nothing gets cut, and no insulation is opened up.
- No manufacturer match required. We don’t need to replicate anyone else’s frame profile because we’re supplying a new one.
- Handles an imperfect opening. Jambs that have shifted, corroded, or been patched over the years are common on older walk-ins. The new frame gives the door a true surface regardless.
- One consistent door standard. Whatever the original was, the replacement is built to Southeast Cooler’s specification.

When a Flat Frame Door Is the Right Choice
Use a flat frame door when:
- Your walk-in was built by a manufacturer other than Southeast Cooler.
- The existing frame is damaged, corroded, out of square, or no longer seals.
- You want the opening left intact.
- You don’t know who built the walk-in, or the original manufacturer is no longer in business.
Consider something else when:
- Southeast Cooler built your walk-in, and the frame is sound. A door leaf is cheaper. See Door Leaf Doors.
- The door is fine, and only the gasket or hardware has failed. See Door Hardware & Gaskets.
Flat Frame vs Door Leaf
| Flat Frame | Door Leaf | |
|---|---|---|
| For walk-ins built by | Any manufacturer | Southeast Cooler |
| What ships | Door + new frame | Door only |
| Existing frame | Stays in place, new frame mounts over it | Reused as-is |
| Requires a sound existing frame | No | Yes |
| Relative cost | Higher | Lower |
| How common | Our most common replacement | Common on SE Cooler walk-ins |
What We Need From You:
- Opening width and height: Measure the clear opening
- Wall panel thickness: Typically 4″ or 6″
- Hinge side: Standing outside the door, looking in
- Jamb condition: Note any damage, corrosion, or patching
- Clearance around the opening: The new frame needs a mounting surface, so tell us what’s adjacent: shelving, corner walls, display cases, equipment
- Photos: The door face, the jamb, the hinge side, and the wall around the opening
Don’t worry about identifying the original manufacturer. The whole point of a flat frame door is that it doesn’t matter.

Cooler & Freezer Applications
- Cooler and medium temperature doors are built with 4″ or 6″ polystyrene insulation (urethane insulation is available upon request).
- Freezer and low temperature doors are built with 4″ or 6″ polystyrene insulation (urethane insulation is also available upon request) and add a heated threshold and frame to keep the seal pliable at low temperatures.

What’s Included:
- Pre-hung and ready to install: With heavy-duty cam lift hinges
- Metal-clad wood frame: Built to attach to your existing door jamb
- Positive sealing gaskets: Magnetic door gaskets and double sweep bottom door gaskets
- Heavy-duty hardware: Hydraulic self-closing door assists, heavy-duty locking door latches, and interior safety door releases
- Aluminum diamond tread kick plates
- Insulated for the application: 4″ or 6″ polystyrene insulation, with a heated threshold and frame on freezer doors (urethane insulation is available upon request).
- ETL Safety Approval Listed
Options:
- Temperature indicator
- Light switch
- Vapor-proof light fixture
Finishes:
- Stainless steel type 304 · Stucco aluminum embossed · Stucco white embossed · Stucco galvanized embossed · Smooth galvanized flat finish.
- Available on interior and exterior surfaces.
Our Google Reviews
See what others have to say about our flat frame door products:
Flat Frame Door FAQs
It’s a replacement door supplied with metal-clad wood that attaches to your existing door jamb. Rather than matching the original manufacturer’s frame, you get a new frame mounted over the opening and a door built to fit it.
Yes — that’s what it’s for. A flat frame door is our most common replacement for walk-ins built by other manufacturers.
No. Because the door comes with its own frame, the original manufacturer’s profile doesn’t matter. Send us your opening dimensions and photos.
No. The new frame mounts to your existing jamb, so the wall panels stay intact.
Usually not, and it’s often the reason to choose a flat frame door in the first place. Send photos of the jamb, and we’ll confirm.
The new frame mounts to the existing jamb, so the finished clear opening will be slightly smaller than the raw opening. Tell us your minimum required clearance, and we’ll spec around it.
Get Your Flat Frame Door Quote
Send us your opening dimensions, whether it’s a cooler or a freezer, and photos of the existing door and jamb. If you’d rather talk it through, call us today and we’ll be happy to help you.


