Manual Horizontal Sliding Doors
Sliding access doors operated by hand, with no electrical connection required.
A manual horizontal sliding door opens by sliding along an overhead track rather than swinging on hinges. Southeast Cooler builds manual sliding access doors for walk-in coolers and freezers, either as part of a new enclosure or as a replacement on an existing opening.
Because the door is operated by hand, no power connection is needed at the opening.

Get a quote on a manual sliding door.
Tell us whether it’s a cooler or a freezer, your opening dimensions, and whether this is a new walk-in or a replacement.
SLIDING DOOR QUOTE

Manufacturing Door Products Since 1979

Custom Built to Your Measurements

No Electrical Required

Cooler & Freezer Applications
Manual or Electric?
Southeast Cooler builds horizontal sliding access doors in both manual and electric versions.
The door itself serves the same purpose in either case; the difference is how it’s opened.

Manual
Manual sliding doors are moved by hand along the track. There is no drive assembly and no electrical connection at the door.

Electric
These sliding doors are powered, with a heavy-duty door track and drive assembly. They require a 115/1/60 electrical supply. See Electric Doors here.
Manual & Electric Specs
| Manual | Electric | |
|---|---|---|
| Opening method | Moved by hand | Powered drive assembly |
| Electrical supply | None required | 115/1/60 required |
| Door track | Overhead track | Heavy duty door track |
| Configurations | Single and bi-parting | Single and bi-parting |
| Insulation and finishes | Identical | Identical |
New Walk-In or Replacement
Manual sliding doors are available on new Southeast Cooler walk-ins and as replacement doors on existing openings, including walk-ins built by other manufacturers. If you’re replacing an existing door, send us your opening measurements and photographs, and we’ll confirm what fits.

Cooler & Freezer Applications
Cooler & Medium Temperature
These doors are built with 4″ or 6″ polystyrene insulation (urethane insulation is available upon request).
Freezer & Low Temperature
These products are built with 4″ or 6″ polystyrene insulation (urethane insulation is available upon request) and add a heated threshold and frame, which keep the seal pliable so the door continues to open and seal reliably at low temperatures.
Finishes
The finishes for our manual sliding door products are available on interior and exterior surfaces. Our finishes include:
- Stainless steel type 304
- Stucco aluminum embossed
- Stucco white embossed
- Stucco galvanized embossed
- Smooth galvanized flat finish
What We Need From You
- Opening width and height
- Wall panel thickness: Typically 4″ or 6″
- Cooler or freezer
- Which direction the door should slide, standing outside the opening
- Whether this is a new walk-in or a replacement
- Photos: The opening, the wall above it, and the wall to the side the door will slide across
Our Google Reviews
See what our valued customers have to say about our manual sliding doors:
Manual Sliding Door FAQs
Rather than swinging open on hinges, a horizontal sliding door travels sideways along an overhead track, moving across the wall beside the opening instead of out into the room or into the walk-in. Southeast Cooler builds them in both manual and electric versions, as single doors and in bi-parting configurations, for cooler and freezer applications alike.
No. A manual door is operated by hand, so there’s no drive assembly and no power connection required at the opening. That’s the main practical difference between the manual and electric versions. If a powered door would suit your operation better, our electric horizontal sliding doors use a heavy-duty door track and drive assembly and require a 115/1/60 electrical supply.
Every cold storage door we manufacture is built to the opening it’s going into rather than pulled from stock. Send us your opening width and height along with the wall panel thickness, and we’ll confirm what we can build. If you’re replacing an existing door, photographs of the opening and the surrounding wall help us check the track and clearance requirements before anything is quoted.
Manual sliding doors are available in stainless steel type 304, stucco aluminum embossed, stucco white embossed, stucco galvanized embossed, and smooth galvanized flat finish. Interior and exterior surfaces can be specified separately, so you can put stainless where it’s needed for cleanability or inspection and use a different finish elsewhere.
Yes. Southeast Cooler builds replacement doors for walk-ins we manufactured and for walk-ins built by other manufacturers. Whether a sliding door suits your existing opening depends on the opening itself and the wall beside it, since the door needs somewhere to travel. Send us measurements and photos, and we’ll tell you what works.
Yes. Sliding access doors are available in single and double bi-parting configurations, with manual or automatic opening. Bi-parting doors part in the middle and travel in opposite directions rather than sliding as a single leaf.
Get A Manual Sliding Door Quote
To get started, please send us your opening dimensions, whether it’s a cooler or a freezer, and photos of the opening and surrounding wall. If you’d rather talk it through, call us today and we’ll be happy to help you.


